ii. Documentation and software for the ISPJUNO programmer
In line with our policy of continuous improvement, the software and associated documentation for this
product are updated on a regular basis. You can download the latest software, firmware, User
Manuals and application notes for the ISPJUNO programmer from the following pages on the Equinox
website:
1. ISPJUNO programmer
See http://www.equinox-tech.com/products/details.asp?ID=1543&displ=tl
You may be asked to register / log in to download some of these files.
iii. Device algorithm - Application notes
The table below lists the Application Notes available for helping to create 'Programming Projects'
for different device families.
Application
Device Family
Note
AN100
Atmel - AT89Sxxxx FLASH microcontrollers
AN101
Atmel - AVR FLASH microcontrollers via the SPI Interface
AN105
Atmel - AVR FLASH microcontrollers via the JTAG Interface
AN118
Generic I2C 24xxx Serial EEPROM memories
AN122
Atmel - AT91SAM7 ARM7 FLASH microcontrollers
AN128
NXP – LPCxxx ARM7 FLASH microcontrollers
AN140
ST STM32 Fxxx - ARM Cortex FLASH microcontrollers
In-System Programming (ISP) of Silicon Labs - Gecko - ARM
AN146
FLASH microcontroller families
These application notes can be found in PDF format on the CD-ROM which was supplied with the
programmer. You can also find the very latest versions on the "ISPJUNO Download Page" on the
Equinox website.
ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
Programming
Interface
SPI
SPI
JTAG
I2C
JTAG / SWD
JTAG / SWD
JTAG / SWD
SWD
9