Interface: – 10Base-T/100Base-TX (IEEE 802.3) Ethernet interface port – USB 2.0 or later interface port Compatible printers: magicolor 2430 DL, magicolor 5430 DL, magicolor 5440 DL Printer driver: Must be installed – magicolor 2430 DL version 1.7.925.0 or later –...
Page 4
Starting magicolor DL Series Firmware Updater CAUTION Before starting the firmware updater, make sure that the printer driver is installed. Download the firmware updater from the Web site, and then decompress it in any folder. Double-click magicolor DL Series Firmware Updater.exe.
Select the appropriate connection for the environment where the printer is being used. For a network connection: The firmware updater searches the print- ers connected to the Local Area Network. For a local (IP) connection: The firmware updater searches the print- ers listed in the Printers folder on your computer.
Page 6
Select the appropriate printer model, and then click the OK button. A list of printers on the network appears. Select the check box for the printer whose firmware is to be updated, and then click Select/Deselect Firmware in the menu bar.
Page 7
Select the updated firmware file for the printer, and then click the Open button. If one of the following messages appears, an incorrect firmware file was selected. Click the OK or No button, and then select the correct firmware file.
Page 8
As an example, the following dialog box shows file version 2.05 selected. Click the OK button. Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. Starting magicolor DL Series Firmware Updater...
Page 9
If the following message appears, click the OK button. Reboot your printer. Click Exit in the menu bar Click the OK button to exit the Updater. Starting magicolor DL Series Firmware Updater...
Page 10
For a local (IP) connection When using Windows XP Service Pack 2 or later, the following message will appear. Click the Unblock button. From the Printer Selection list, select the printer whose firmware is to be updated. Click the Browse button.
Page 11
Select the updated firmware file for the printer, and then click the Open button. If one of the following messages appears, an incorrect firmware file was selected. Click the OK or No button, and then select the correct firmware file.
Page 12
Click the Update Firmware button. Click the OK button. Starting magicolor DL Series Firmware Updater...
Page 13
Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. If the following message appears, click the OK button. Reboot your printer. Starting magicolor DL Series Firmware Updater...
Page 14
Click the Close button to exit the Updater. Starting magicolor DL Series Firmware Updater...
Page 15
For a local (USB) connection From the Printer Selection list, select the printer whose firmware is to be updated. Click the Browse button. Select the updated firmware file for the printer, and then click the Open button. Starting magicolor DL Series Firmware Updater...
Page 16
If any of the following messages appear, an incorrect firmware file was selected. Click the OK or No button, and then select the cor- rect firmware file. Starting magicolor DL Series Firmware Updater...
Page 17
Click the Update Firmware button. Click the OK button. Starting magicolor DL Series Firmware Updater...
Page 18
Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. If the following message appears, click the OK button. Reboot your printer. Starting magicolor DL Series Firmware Updater...
Page 19
Click the Close button to exit the Updater. Starting magicolor DL Series Firmware Updater...