Menu (magicolor 5450)
7.7.8
ENERGY SAVER TIME
Function
• Sets the amount of time before the machine enters Energy Saver mode after the last
print is received or the last key operated.
Use
• To change the amount of time before the machine enters Energy Saver mode.
Setting
1. Select "ENERGY SAVER TIME" and press the MENU/SELECT key.
/procedure
2. Select "Desired auto delete time" with the Up key /Down key
MENU/SELECT key.
• The default setting is "30 minutes."
15 minutes
NOTE
• This menu is available only when "ENERGY SAVER" is set to "ON."
7.7.9
MENU TIMEOUT
Function
• Sets the amount of time before the Control Panel returns to the status screen from
menu mode and the help display.
Use
• To set the amount of the time before the Control Panel returns to the status screen
from the menu and the help display.
Setting
1. Select "MENU TIMEOUT" and press the MENU/SELECT key.
/procedure
2. Select "Desired time" with the Up key /Down key
key.
• The default setting is "2 minutes."
OFF
7.7.10
LCD BRIGHTNESS
Function
• Sets the brightness of the Control Panel LCD display.
Use
• To set the brightness of the Control Panel LCD display.
Setting
1. Select "LCD BRIGHTNESS" and press the MENU/SELECT key.
/procedure
2. Select "Desired brightness" with the Up key /Down key
SELECT key.
The default setting is "0."
-3
30 minutes
1 minute
-2
-1
0
3-70
Main Unit Field Service
and press the
1 hour
4 hours
and press the MENU/SELECT
2 minutes
and press the MENU/
+1
+2
+3