Toner Empty - Konica Minolta magicolor 5430 DL Service Manual

Menu (magicolor 5450)
D. PAPER EMPTY /TRAY4
Function • Specifies whether a "TRAY 4 Paper Empty" is displayed as a Normal message when
it is empty.
Use • To specify whether to display a "TRAY 4 Paper Empty" message as a Normal
message.
Setting ON: "Paper empty message" is displayed on Normal message when Tray is empty.
/procedure OFF: "Paper empty message" is not displayed on Normal message when Tray is empty.
1. Select "ENABLE WARNING" and press the MENU/SELECT key.
2. Select "PAPER EMPTY" and press the MENU/SELECT key.
3. Select "TRAY 4" and press the MENU/SELECT key.
4. Select "Desired setting" and press the MENU/SELECT key.
• The default setting is "ON."
NOTE
• This menu is available only when an optional Lower Feeder Unit is installed.
7.7.16

TONER EMPTY

Function • Specifies whether printing stops or continues when a Toner Empty occurs.
Use • To specify whether printing should stop or continue printing when a Toner Empty
occurs.
Setting STOP: Print stops when Toner Empty occurs. Print cannot be started until the toner car-
/procedure tridge is exchanged.
CONTINUE: Print continues even if Toner Empty occurs. Print is available, however
1. Select "ENABLE WARNING" and press the MENU/SELECT key.
2. Select "TONER EMPTY" and press the MENU/SELECT key.
3. Select "Desired setting" and press the MENU/SELECT key.
• The default setting is "STOP."
OFF
there is no toner and printing with proper image is impossible.
STOP
3-78
Main Unit Field Service
ON
CONTINUE