13D0H: Parameter Chip Failure; 13E2H: Flash Rom Write Error 13E3H: Flash Rom Device Fault; C002, C003: Ram Error (Only For Magicolor 5450) - Konica Minolta magicolor 5430 DL Service Manual

Malfunction code
2.4.19

13D0H: Parameter Chip failure

Parameter Chip (IC15)
Step
Unplug the power cord and plug it in, then turn
1
OFF and ON the Power Switch.
Check Parameter Chip (IC15) on PWB-A for
2
proper connection and correct as necessary.
3 Change PWB-A.
4 Change Parameter Chip.
2.4.20 13E2H: Flash ROM write error
13E3H: Flash ROM device fault
Mechanical Control Board (PWB-A)
Step
1 Change PWB-A.
2.4.21

C002, C003: RAM error (Only for magicolor 5450)

Print Control Board (PWB-P)
Step
Turn OFF the Power Switch of the printer and
1
turn it ON again (Restart of the printer.)
Check connection state of the extension memory
2
and correct as necessary.
Check the PWB-P connector for proper connec-
3
tion and correct as necessary.
4 Changethe extension memory.
5 Change PWB-P.
Relevant Electrical Parts
Mechanical Control Board (PWB-A)
Action
Relevant Electrical Parts
Action
Relevant Electrical Parts
Extension memory
Action
4-22
Main Unit Field Service
WIRING DIAGRAM
Location
Control Signal (Electrical
Component)
-
-
-
-
WIRING DIAGRAM
Location
Control Signal (Electrical
Component)
-
WIRING DIAGRAM
Location
Control Signal (Electrical
Component)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-