Konica Minolta magicolor 5430 DL Service Manual page 142

Main Unit Field Service
Message
Priority
LCD1
PAPER EMPTY
TRAYX EMPTY
High 10
MANUAL FEED
PAPER ERROR
11
TRAYX PAPER
ERR
12 OUTPUT FULL
13 MEMORY FULL
HOLD JOB
Low 14
ERROR
* SSSS represents the media size while TTTT shows the media type.
Description of the Control Panel (magicolor 5450)
LCD2/LCD3
• No specified media in Trays 1 to 4.
SSSS * • Tray 3/4 is loaded with the specified media but is not
TTTT * set appropriately.
• Displays when "TRAY CHAINING" is set to "ON."
• No specified media in the specified Tray or Tray 3/4 is
SSSS *
not set appropriately.
TTTT *
• Displays when "TRAY CHAINING" is set to "OFF."
• During print startup, media has been loaded in Tray 1
and is waiting for a print start command.
After the user confirms the media and gives the print
start command, printing starts.
SSSS *
How to start printing:
TTTT *
1. Press the Up key .
2. Press the Down key , select Tray with Help Menu
and press the MENU key.
3. Set the media loaded in the Tray 1 again.
• The size and type of media specified in the driver is
not loaded in any Tray.
SSSS *
• A different size of media from the one specified in the
TTTT *
driver is loaded in the Tray at paper feeding.
• Displays when "TRAY CHAINING" is set to "ON."
• The size and type of media specified in the driver is
not loaded in the specified Tray.
SSSS *
• A different size of media from the one specified in the
TTTT *
driver is loaded in the specified tray at paper feeding.
• Displays when "TRAY CHAINING" is set to "OFF."
REMOVE The printed media volume has reached maximum
PAPER capacity in the Exit Tray.
The volume of data to be printed exceeds the permissi-
PRESS
ble amount of data to be processed by the machine's
CANCEL
memory.
UNABLE TO The specified data of the held job is being received, but
STORE JOB an optional HDD is not installed.
3-39
Description