Konica Minolta magicolor 5430 DL Service Manual page 119

Menu (magicolor 5430 DL /5440 DL)
H. RESET COUNTER TRANSFER UNIT
Function • Resets the counter value of the Transfer Belt Unit.
Use • To reset the counter when the Transfer Belt Unit is replaced.
Setting/ 1. Select RESET COUNTER TRANSFER UNIT and press the MENU/SELECT key.
procedure 2. This resets the counter and the Engine/Service menu reappears.
I. ENERGY SAVER
Function • Selects whether to use Energy Saver or not.
Use • To specify whether or not to use Energy Saver mode.
Setting • The default setting is "ON."
/procedure
J. RESTORE USER DEFAULT
Function • Reinitializes the ENERGY SAVER, AUTO CONTINUE, and TRAY CHAINING
settings.
• Reinitializes the administrator password.
Use • To restore the user default Energy Saver, Auto Continue, and Tray Chaining settings.
Setting 1. Select RESTORE USER DEFAULT and press the MENU/SELECT key.
/procedure 2. This reinitializes the functions involved and the Engine/Service menu reappears.
K. DUPLEX DENSITY
Function • Adjusts any abnormal print density in duplexed prints.
Use • To adjust the image density of duplexed prints when there is a problem due to the cli-
mate in which the Printer is being operated (such as dry or very humid).
Setting • The default setting is "0."
/procedure
1. With RESTORE USER DEFAULT selected, hold down
2. With DUPLEX DENSITY selected, press the
the appropriate adjustment level value.
Adjustment range: -8 to +7 (16 steps)
3. Press the MENU/SELECT key to validate the new adjustment level setting.
L. ALTITUDE SETUP
Function • Adjusts the Printer if there is an image problem such as uneven density.
Use • To adjust the printer when there is a problem due to the high altitude at which the
printer is being operated.
Setting • The default setting is "0."
/procedure
1. With RESTORE USER DEFAULT selected, hold down
2. With ALITUDE SETUP selected, press the
appropriate adjustment level value.
Adjustment range: 0 to 3 (4 steps)
3. Press the MENU/SELECT key to validate the new adjustment level setting.
NOTE
• When the setting has been changed, be sure to run COLOR CALIBRATION.
☞
3-15
ON
3-16
Main Unit Field Service
OFF
key for 2 seconds.
key / key as necessary to select
key for 2 seconds.
key / key as necessary to select the