Normal Messages - Konica Minolta magicolor 5430 DL Service Manual

Description of the Control Panel (magicolor 5450)
6.1.3

Normal messages

The Basic Screen is displayed after warmup has been completed.
The "READY LED " lights up while the message is displayed.
Display
LCD 1 Printer mode is displayed. (Normally, "READY" is displayed.)
LCD 2
The message is displayed. (Normally, no message is displayed.)
LCD 3
Key guidance is displayed.
• Normally "MENU to enter" is displayed.
LCD 4 When the MENU key is pressed, the panel displays the MENU screen.
• When a WARNING message is displayed, "
When the Down key
State
Message
Key guidance
A. Toner-remaining level gauge
• The amount of each color of toner remaining is graphed in 10% increments (11 scales.)
However, it's not displayed during the following states:
- Operator Call
- Service Call
- Menu
- Help menu
- BOOT message
- When the toner remaining amount is not determined immediately after startup.
Description
is pressed, the panel displays the HELP screen.
READY
to enter
YMCK
3-28
Main Unit Field Service
for help" is also displayed.
Toner-remaining
level gauge
YMCK
Toner-remaining amount
100% (Full)
Toner-remaining amount
0% (Empty)
Toner color display
4138F3E007DA