Clock; Hdd Format - Konica Minolta magicolor 5430 DL Service Manual

Menu (magicolor 5450)
7.7.12

CLOCK

A. DATE
Function • Sets the date of the printer's built-in clock.
Use • To change the date of the printer's built-in clock.
Setting DATE (DD.MM.YY): For Europe
/procedure DATE (MM.DD.YY): For North America
DATE(YY.MM.DD): For Japan
The following shows how to set DATE (DD.MM.YY).
1. Select "CLOCK" and press the MENU/SELECT key.
2. Select "DATE (DD.MM.YY)" and press the MENU/SELECT key.
3. Set "Date" with the Up key /Down key
4. Repeat the above procedures to set "Month" and "Year."
5. Press the MENU/SELECT key.
DD: "01" to "31".
MM: "01" to "12".
YY: "2004" to "2032".
B. TIME
Function • Sets the time of the printer's built-in clock.
Use • To change the time of the printer's built-in clock.
Setting 1. Select "CLOCK" and press the MENU/SELECT key.
/procedure 2. Select "TIME" and press the MENU/SELECT key.
3. Set "Hour" with the Up key /Down key
4. Repeat the above procedures to set "Minute."
5. Press the MENU/SELECT key.
7.7.13

HDD FORMAT

Function • Initializes the format of the optional Hard Disk unit.
Use • To initialize the format of the optional Hard Disk unit.
Setting USER AREA ONLY: Initialize only user area.
/procedure ALL: Initialize all area
1. Select "HDD FORMAT" and press the MENU/SELECT key.
2. Select "Desired initialization method" and press the MENU/SELECT key.
3. "ARE YOU SURE?" is displayed.
4. By pressing the MENU/SELECT key, initialization starts. By pressing the CANCEL
key without pressing the MENU/SELECT key, the start of initialization can be can-
celled.
5. The printer restarts and the hard disk is initialized. Once the initialization starts, it
cannot be cancelled.
• The default setting is "USER AREA ONLY."
NOTE
• This menu is available only when an optional Hard Disk unit is installed.
USER AREA ONLY
3-72
Main Unit Field Service
and press the Right key .
and press the Right key .
ALL