5.9
Servicing the tripod
step-by-step
66
Step
Description
☞
The laser beam of an adjusted laser guide matches exactly the circle
of 50 m or 120 m depending on the distance.
Servicing the Tripod
2
008706_001
The following table explains the most common settings.
The connections between metal and timber components must
☞
always be firm and tight.
1.
Tighten the leg cap screws moderately, with the supplied Allen key.
2.
Tighten the articulated joints on the tripod head enough to keep the
tripod legs open when lifting the tripod off the ground.
3.
Tighten the Allen screws of the tripod legs.
1
3
Check & Adjust