Servicing The Tripod - Leica TS11 User Manual

4.9

Servicing the tripod

step-by-step
TS11/TS15, Check & Adjust
Servicing the Tripod
2
TS_076
The following table explains the most common settings.
Step Description
The connections between metal and timber components must always be
firm and tight.
1. Tighten the leg cap screws moderately, with the supplied allen key.
2. Tighten the articulated joints on the tripod head enough to keep the tripod
legs open when lifting the tripod off the ground.
3. Tighten the allen screws of the tripod legs.
1
3
101