Data Storage Concept - Leica Viva TS16 User Manual

2.2.3
Description
Memory device
☞
Transfer data
☞
30
Model Power supply
Externally by GEV52 cable and GEB371 battery.
If an external power supply is connected and the internal
battery is inserted, then the external power is used.
SmartAn- Internally via GEB212 battery fitted into the antenna.
tenna

Data Storage Concept

Data is stored on a memory device. The memory device can be an SD card or
internal memory. For data transfer an USB stick can also be used.
Device Description
SD card All instruments have an SD card slot fitted as standard. An
SD card can be inserted and removed. Available capacity:
1 GB and 8 GB.
USB stick All instruments have a USB port fitted as standard.
Internal All instruments have an internal memory fitted as standard.
memory Available capacity: 2 GB.
While other SD cards/USB sticks can be used, Leica Geosystems
☞
recommends to only use Leica SD cards/USB sticks and is not
responsible for data loss or any other error that can occur while
using a non-Leica SD card/USB stick.
Unplugging connecting cables or removing the SD card or USB stick during the
measurement can cause loss of data. Only remove the SD card or USB stick or
unplug connecting cables when the TS instrument is switched off.
Data can be transferred in various ways.
SD cards can directly be used in an OMNI drive as supplied by Leica Geosys-
tems. Other PC card drives can require an adaptor.
Description of the System