Fixing The Cs35 Tablet To A Holder And Pole - Leica Viva TS16 User Manual

4.7
Components of
GHT63 clamp and
GHT78 holder
Fixing the CS35 tablet
and GHT78 to a pole
step-by-step
46

Fixing the CS35 Tablet to a Holder and Pole

For fixing the CS35 tablet to a pole you need the following components:
a
b
c
009241_001
For an aluminium pole, fit the plastic sleeve to the pole clamp.
☞
If the 833343 hand strap with high corner guards is attached to the
☞
tablet, remove the inserts from the mounting brackets before fixing
the tablet to the mounting plate. To untighten the screws of the
removable inserts, use a 2.5 mm allen key.
1. Insert the pole into the clamp hole.
2. Attach the holder to the clamp using the clamp bolt.
3. Adjust the angle and the height of the holder on the pole to a com-
fortable position.
4. Tighten the clamp with the clamp bolt.
5.
009244_001
Before placing the CS35 tablet onto the mounting plate, ensure that
the locking lever is set to the unlocked position (see illustration).
6.
6a
009246_001
Lower the left side of the tablet and slide it from right to left into
the mounting brackets of the holder.
GHT63 clamp
d
a Plastic sleeve
b Pole clamp
e
c Clamp bolt
f
GHT78 holder
g
h
d Locking lever
e Mounting arm
f Mounting brackets
g Removable inserts
h Mounting plate
6b
Operation