Leica Viva TS16 User Manual page 45

Detaching the field
controller from a pole
step-by-step
Operation
5. Before placing the CS field controller onto the mounting plate,
ensure that the locking pin is put into the unlocked position. To
unlock the locking pin, push the locking pin to the left.
008546_001
6. Hold the CS field controller above the holder and lower the end of
the CS field controller into the mounting plate.
7. Apply slight pressure in a downward direction and then lower the
top part of the CS field controller until the unit is clicked into the
holder. The guides of the mounting plate aid in this action.
7b
7c
7a
008547_001
8. After the CS field controller is placed onto the mounting plate,
ensure that the locking pin is put into the locked position. To lock
the locking pin, push the locking pin to the right.
008549_001
1. Unlock the locking pin by pushing the locking pin to the left of the
mounting plate.
2. Place your palm over the top of the field controller.
3. While in this position, lift the top of the field controller from the
holder.
1
2
3
008551_001
45