Detaching the tablet
from the holder/pole
step-by-step
4.8
Description
Uninstalling the
previous drivers
Operation
7.
009248_001
After placing the tablet onto the mounting plate, set the locking
lever to the locked position (see illustration).
1.
009249_001
Set the locking lever of the GHT78 holder to the unlocked position.
2.
009250_001
Lift the right side of the tablet and slide the tablet to the right and
out of the holder.
Connecting to a Personal Computer
Windows Mobile Device Center for PC with Windows 7/Windows 8/Windows 10
operating system is the synchronization software for Windows mobile-based
pocket PC. WMDC enables a PC and a Windows mobile-based pocket PC to
communicate.
Leica USB drivers support Windows 7, Windows 8 (8.1) and Windows 10 oper-
ating systems.
Cables
Leica USB drivers support:
Name
Description
GEV223
USB data cable, 1.8 m, connects instrument to Mini-USB to USB
GEV234
USB data cable, 1.65 m, connects CS to GS or CS to PC (USB)
GEV261
Y-cable, 1.8 m, connects instrument to PC – battery
Skip the following steps if you have never installed Leica USB drivers
☞
before.
If older drivers were previously installed on the PC, follow the instructions to
uninstall the drivers prior the installation of the new drivers.
7
1
2b
2a
47