Connecting To A Personal Computer - Leica TS11 User Manual

4.7

Install Leica Viva
USB drivers
TS11, Operation

Connecting to a Personal Computer

Microsoft ActiveSync (for PCs with Windows XP operating system) or Windows Mobile
Device Center (for PCs with Windows Vista or Windows 7/Windows 8 operating
system) is the synchronisation software for Windows mobile-based pocket PCs. Micro-
soft ActiveSync or Windows Mobile Device Center enables a PC and a Windows mobile-
based pocket PC to communicate.
Step Description
1. Start the PC.
2. Insert the Leica Viva Series USB card.
3. Run the SetupViva&GR_USB_XX.exe to install the drivers necessary for
Leica Viva devices. Depending on the version (32bit or 64bit) of the oper-
ating system on your PC, you have to select between the three setup files
following:
• SetupViva&GR_USB_32bit.exe
• SetupViva&GR_USB_64bit.exe
• SetupViva&GR_USB_64bit_itanium.exe

The setup has to be run only once for all Leica Viva devices.
4. The Welcome to InstallShield Wizard for Leica Viva & GR USB drivers
window appears.

Ensure that all Leica Viva devices are disconnected from your PC
before you continue!
5. Next>.
6. The Ready to Install the Program window appears.
7. Install. The drivers will be installed on your PC.

For PCs with Windows Vista or Windows 7/Windows 8 operating
system: If not already installed, Windows Mobile Device Center will
be installed additionally.
8. The InstallShield Wizard Completed window appears.
9. Check I have read the instructions and click Finish to exit the wizard.
37