Testing Flash Memory - Keithley 4200A-SCS User Manual

Section 8: Testing flash memory
Recommended interconnect parts for flash memory testing
Qty. Description
SMA tee, female – male – female
6
4 LEMO triaxial to SMA adapter
4 3-slot male triaxial to female BNC
adapter
4 SMA male to BNC female adapter
2 10.8 cm (4.25 in.) white SMA cables
4 20.3 cm (8 in.) white SMA cables
4 2 m (6.6 ft) white SMA cables
4 1.5 m (5 ft) BNC cable
This configuration permits independent source and measure for each terminal in a typical 4-terminal
floating gate transistor.
8-2
Figure 154: Recommended parts for flash memory testing
Model 4200A-SCS Pulse Card (PGU and PMU) User's Manual
Comment
Trigger, combine SMU and pulse channels
Adapt SMU Force output to SMA for signal
interconnect
Convert BNC cabling to triaxial for prober
or switch matrix connection
Adapt Tee to BNC for cabling from
instrument to probe manipulators
Interconnect for triggering
Interconnect between pulse card and SMU
signals
Connect to probe manipulators
4200A-PMU-900-01 Rev. A December 2020
Keithley Model
Number
CS-1391
CS-1390
7078-TRX-BNC
CS-1252
CA-451A
CA-452A
CA-404B
7051-5