Kpulse Setup And Help - Keithley 4200A-SCS User Manual

Section 5: KPulse (for Keithley Pulse Cards)

KPulse setup and help

The KPulse menus include:
•
File: Use this menu to load and save KPulse setups and exit KPulse. By default, setup files are
saved at the command path location:
C:\s4200\kiuser\KPulse\Setup.
•
Tools: From this menu, select Options to open the KPulse Options dialog box, which includes
the following options:
▪
Show Pulse Mode Graphs: When enabled, shows the Standard Pulse waveform previewers
for each pulse card tab.
▪
Show Segment Arb Graphs: When enabled, shows the Segment Arb pulse waveform
previewers for each pulse card tab.
▪
Show File Arb Graph: When enabled, shows the Custom File Arb pulse waveform previewer
for each pulse card tab.
▪
Show Arb Generator Graph: When enabled, shows the Arb Generator pulse waveform
previewer.
▪
Trigger Master: Select the pulse card that will serve as the trigger master. Select None if
you are not using a trigger master. See
5-2
Model 4200A-SCS Pulse Card (PGU and PMU) User's Manual
Figure 100: KPulse GUI
Triggering (on page 5-3) for more information.
4200A-PMU-900-01 Rev. A December 2020