Custom File Arb Waveforms (Full Arb) - Keithley 4200A-SCS User Manual

Section 5: KPulse (for Keithley Pulse Cards)
6. Type a name for the file. The .ksf extension is added automatically.
7. Select Open.
8. Select Export.
You can import a saved seg_arb.ksf waveform file into the pulse card using the seg_arb_file
function.
For segment stress/measure testing, you can import the .ksf file through the Clarius Configure pane.
For details about segment stress/measure testing, refer to "Segment stressing" in the Model
4200A-SCS Clarius User's Manual.

Custom file arb waveforms (full arb)

The following figure summarizes the basic processes to create a custom full arb waveform file, to load
the file into a pulse card, and to output the pulse waveforms.
Figure 105: Basic process to create and output custom file Arb waveforms
To create custom file arb waveforms (full arb):
1. Select and configure waveforms.
▪
After you select an available waveform type, configure its settings, and name it, the waveform
is placed in the Scratch Pad.
▪
Waveforms remain in the Scratch Pad until they are deleted by the user.
▪
Refer to
for custom file arb. Refer to
page 5-9) for details.
5-8
Waveform types (on page 5-13) for information about the waveform types available
Custom Arb file operation: Select and configure waveforms
Model 4200A-SCS Pulse Card (PGU and PMU) User's Manual
4200A-PMU-900-01 Rev. A December 2020
(on