Table of Contents
Advertisement
3.1 Installation
This menu installs the machine operation program and the data fi les required for it to the OP box through
input device(USB).
3.1.1) Program : Embroidery Operation Program
At the moment of <Fig. 3.0-2>, please connect USB memory in the USB port and press 1. Program to
see <Fig. 3.1.1-1> shown below. If you want to install, press "OK." To cancel, please press "Cancel."
<Fig.3.1.1-1>
<Fig.3.1.2-1>
3.1.2) Data : Data required for embroidery operation program.
At the moment of <Fig. 3.0-2>, please connect USB memory in the USB port and press
2. Data to
see <Fig. 3.1.2-1> shown above. If you want to install, press "OK." To cancel, press "Cancel."
3.1.3) Machine Update : Updates the machine.
If you want to update the machine, please press 3. M/C Update in the <Fig. 3.0-2>. You can see the
button selected with dark color as shown in the <Fig. 3.1.3-1>. If you quit the installation in this status,
the machine update will progress when it is rebooted.
<Fig.3.1.3-1>
12
Advertisement
Table of Contents
