Table of Contents
Advertisement
6.2 Design
When you press
whether to cancel the work or not appears. If you press "Yes", the embroidery work will be stopped, and
the function menu will be changed to the main function menu before starting embroidery. If you press
"No" button, the embroidery work will not be stopped, and the "Design" before starting embroidery ap-
pears. Although the delete and select function of the currently called design are limited, and the select
function for the remaining designs is limited, it is possible to copy, export, or edit the designs.
You can use these menus in the same way as the menus before starting embroidery.
6.3 Setting
(1) Design
Notice : This menu may differ according to the machine type.
In the state of the pause during embroidery, press "Setting" >> "Design" to see the screen as the <Fig.
6.3-1>. All the setting functions except "8. Front Sequin Number" and "9. Rear Sequin Number" are
limited. You cannot use the limited function settings, but you can use the rest of two menus in the same
way as the menus before starting embroidery.
(2) The rest of the menus except design
Notice : This menu may differ according to the machine type.
You can use them in the same way as the menus before starting embroidery.
button during the pause of embroidery operation, a message asking
<Fig.6.3-1>
86
Advertisement
Table of Contents
