SunStar NNS Series User Manual page 78

Table of Contents

5.4.5) Hoop

This function is to choose the hoop size that you want.

<Fig. 5.4.5-1> is the screen when you chose "Hoop."

If you press the hoop size, a window asking whether to move to the frame center will appear. Press "Yes"

for the frame to move to the frame origin automatically in order to check the X, Y frame limits. After

seeking all, it ﬁ nally moves to the frame center.

<Fig.5.4.5-1>

Table of Contents

Single Small Multi head