Design; Needle; Offset Position; Attachment - SunStar NNS Series User Manual

Design

Emb. Parameter
M/C Parameter

Needle

Offset Position

Attachment

Other

※ How to set the each item
You can set design, emb. parameter, M/C parameter, offset position, and option setting by pressing each
setting button.
- Pressing the input column once where you want to input, you can directly input using the touch pad
generated on the right side.
- To apply the input setting value, press "OK" button. To correct, press "BACK SPACE" to delete and
re-write.
5.3.1) Design
Notice : This menu may differ according to the machine type.
In the <Fig. 5.3-1>, press "Design" button to <fi g.5.3.1-1> see 9 items for design setting.
To set the parameters such as enlargement, reduction,
angle setting, etc.
To set the parameters regarding the embroidery.
To set the parameters regarding the machines.
To set the needle selection, change, etc.
To designate the offset positions on the design.
To set the attachments such as cording and boring.
To set the sound volume, language, stitch no. initialization,
and date & time.
<Fig.5.3.1-1>
46