SunStar NNS Series User Manual page 36

Table of Contents

Advertisement

[Example 5.2.2-4] Export the design in Room No. 3 to USB.
① Carry out [Example 5.2.2-1] until no.②.
② Connect the USB memory to USB Port.
③ On the screen of <Fig. 5.2.2-3>, press the room no. 3 and "Export" button.
When you see the message like <Fig. 5.2.2-12>, press the extension that you want between SST2 and
DST and "OK" to export the design to the USB memory.
5.2.3) Edit
You can edit the design here. To edit, on the screen of the <Fig. 5.2.2-3> press the room no. 3 and "Edit"
button, and you can see the next screen as the <Fig. 5.2.3-1>.
Now each menu will be explained one by one.
<Fig.5.2.2-12>
<Fig.5.2.3-1>
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

SingleSmallMulti head

Table of Contents