Table of Contents
Advertisement
[Example 5.3.5-1]
Design starting position - X : 500, Y : 300
Offset middle position - X : 1000, Y : 1000
Stop position after fi nishing the design(Offset)
- X : 1500, Y : 1700
Set as above.
① Press "Offset Position" button in the setting menu.
You will see the screen as the <Fig. 5.3.5-1>.
② Press "Starting Position" button.
Design starting position will be enabled.
③ Set the X, Y values for the frame position using the arrow keys.
④ Press "Middle Position" button.
Offset middle position will be enabled.
⑤ Set the X, Y values for the frame position using the arrow keys.
⑥ Press "Offset Position" button.
Stop position after fi nishing the design will be enabled.
⑦ Set the X, Y values for the frame position using the arrow keys.
⑧ Press "X" button on the top right to complete the offset position setting returning back to the
previous screen.
66
Advertisement
Table of Contents
