Table of Contents
Advertisement
5.3.3) Machine Parameter
Notice : This menu may differ according to the machine type.
<Fig. 5.3.3-1>, <Fig. 5.3.3-2>, and <Fig. 5.3.3-3> show the screen of machine parameter setting. You
can enter the value within the range using the number touch pad just like the design setting. To see the
next menus, you can scroll down the screen.
<Fig. 5.3.3-1> is the fi rst screen that shows 9 setting menus. Scrolling down the screen, you can see the
next 9 setting menus as in the <Fig. 5.3.3-2>. Scrolling down to the bottom again, you will see the last
machine parameter setting menu as in the <Fig. 5.3.3-3>.
Pressing the
button, you can change all the values to the default values that the operation
program has.
To fi nish the setting, press
button.
<Fig.5.3.3-1>
<Fig.5.3.3-2>
<Fig.5.3.3-3>
54
Advertisement
Table of Contents
