Table of Contents
Advertisement
(3) Thread Tension Setting
(※ Only available for the machine that has thread tension control board.)
You can enter the thread tensions for each needle set in here. During the actual embroidery, it will
automatically change to the thread tension entered for corresponding needle when the needle is
changed. This can only be available for the machine that has thread tension control board.
<How to set>
① Press "Thread Tension" button at the bottom of the needle setting screen.
② The screen will shift for the thread tension setting as the <Fig. 5.3.4-5>.
③ Press 1
step input column
st
④ After selecting the thread tension that you want at the bottom of the screen using the arrow keys,
press "OK" button.
⑤ When it moves to the 2
likewise, and press "OK" button.
⑥ If you would like to apply the same thread tension for all the needles, select the thread tension you
want in the thread tension input column and press "All" check box on the right.
⑦ Entering all the thread tensions for all the needles, you can press "X" button on the top right to
fi nish the setting returning back to the previous screen.
<Fig.5.3.4-5>
step input column automatically, select the thread tension that you want
nd
63
Advertisement
Table of Contents
