SunStar NNS Series User Manual page 71

(3) Cording Setting
<How to set>
① Press "Attachment" button in the setting menu.
② Press "Cording" input column.
③ Enter the corresponding number between "Left(1)" and "Right(2)" using the touch pad, and press
"OK." If you do not want to use anything, select "No(0)" and press "OK" button.
④ Press "Cording RPM" input column.
⑤ Enter the RPM value that you want, and press "OK" button.
⑥ Press "X" button on the top right to complete the cording setting returning back to the previous
screen.
(4) Boring Setting
<How to set>
① Press "Attachment" button in the setting menu.
② Press "Boring" input column.
③ Enter the needle number that is equipped with boring within the setting range using the number
touch pad.
If you do not want to use anything, select "No(0)" and press "OK" button.
④ Press "Boring RPM" input column.
⑤ Enter the RPM value that you want, and press "OK" button.
⑥ Press "X" button on the top right to complete the boring setting returning back to the previous
screen.
69