5.2.3.4) Hoop
This is the preview function that allows you to check the design being edited in the actually designated
hoop. When the design edit is completed, press "Hoop" and select the corresponding hoop type on the
right column to preview the edited design in the selected hoop.
5.3 Setting
In the setting menu, you can set the overall conditions for the embroidery. There are 7 menus ― Design,
Embroidery Parameter, Machine Parameter, Needle, Offset Position, Option, and the Others.
You can see the <Fig. 5.3-1> by pressing
<Fig.5.2.3.4-1>
button in the intial screen.
<Fig.5.3-1>
45