Riser Card Connectors - Fujitsu TeamPoS 2000 Installation And Maintenance Manual

TeamPoS 2000
5.6

Riser Card Connectors

Note: Dashed lines are components on the opposite side. There are two riser cards:
Revised riser card, 2 PCI slots, KD20033-B41X supports TeamUSB,
TeamCOMBO and Retail I/O boards.
Original riser card, 2 PCI slots, CA21259-B21X supports Retail I/O and
TeamCOMBO only.
The revised riser card (KD20033-B41X) automatically detects the settings for
TeamCOMBO and Retail I/O board or TeamUSB board.
There are two jumpers on the back side of the riser card for 5V Standby and LED Power.
The jumper settings are shown below.
5-26
A or H Motherboard
M Motherboard
Rev 3.0
MAINTENANCE MANUAL
LED Power 5V Standby
1-2 1-2
2-3 2-3
90000291