Table of Contents
Advertisement
TeamPoS 2000
Chapter 3 DIMENSIONS
This section shows the dimensions of the TeamPoS 2000 control unit and peripherals.
Other peripherals may be included in the configurations. For peripherals not shown, refer
to the appropriate documentation. Dimensions are approximate external and in
millimeters (inches).
The TeamPoS 2000 control unit is available in two sizes, compact and standard. Both
units can be stacked, where peripherals (printer, keyboard, operator display and customer
display) are stacked on top of the control unit. This requires brackets to be installed on
the control unit that restrain movement of the peripherals. The new D15 LCD display
can only be stacked on the standard control unit. The 12.1" LCD can be stacked on
either the standard or compact control unit. The cash drawer, if stacked, is located under
the control unit. Only the model MP5 cash drawer can be stacked with the compact
control unit and only the model TP10 with the standard unit
Dispersed configurations do not stack the peripherals. Instead the control unit and/or
cash drawer is located under the checkstand or counter and peripherals are installed on
the checkstand or counter. Dispersed configurations require longer cables. Partially
dispersed configurations stack some peripherals and disperse others.
3.1
Standard TeamPoS 2000 15" LCD Stacked Configuration
90000291
Rev 3.0
MAINTENANCE MANUAL
3-1
Hide quick links:
Advertisement
Table of Contents
