Lcd Cable Requirements - Fujitsu TeamPoS 2000 Installation And Maintenance Manual

TeamPoS 2000

5.10.2 12.1" LCD Cable Requirements

The following graphics show LCD cable requirements for various configurations of
digital and analog LCD
cable part numbers.
TeamPoS 2000 with Digital LCD, Touch & Speaker Options
* The application software will determine where the touch panels connect to the TeamPoS 2000. The touch cables can
be connected to one of the PC board's COM ports or any male 5VDC connector on the Retail I/O Board (Ports 1, 2 or 5) or
TeamCOMBO Board (Port 1 or 2)
90000291
*
. Refer to the cable summary at the end of these graphics for
TeamPoS 2000 with Single Digital LCD
Rev 3.0
MAINTENANCE MANUAL
5-55