TeamPoS 2000
3.
Connect the MSR cable to the MSR unit with the conductors on the cable exposed
away from the MSR unit (up).
Connect the MSR cable to the MSR unit with the conductors on the cable exposed
away from the MSR unit (up).
Set the larger opening of the MSR unit to the corresponding larger opening on the
keyboard unit.
5.
Connect the cable to the printed circuit board of the
keyboard with exposed conductors faced down.
6.
Replace the bottom cover of the unit.
7.
Plug in the keyboard cable.
5-36
Rev 3.0
MAINTENANCE MANUAL
90000291