Table of Contents
Advertisement
TeamPoS 2000
Installing LCD
Note: LCD monitors come with a protective film over the screen. Do not remove this film
until installation is complete to avoid accidental damage to the surface.
1. Remove filler plate from the back of LCD.
2. Connect cables from rotating arm to the correct port on LCD.
3. Make sure that all cables are routed under the LCD cable guide.
4. Attach LCD to the rotating arm bracket by using screws (4).
5. Replace filler plate.
5-62
Rev 3.0
MAINTENANCE MANUAL
90000291
Hide quick links:
Advertisement
Table of Contents
