Table of Contents
Advertisement
TeamPoS 2000
5.10.4. D12/A12 LCD Stand and Rotating Arm Assembly
Installing LCD Cables
1.
Rotate arm completely to one side in order to feed the cables into the stand. This
picture shows the metal bracket repositioned to allow for easier routing. To do this a
screws is removed from one side only.
2.
Install the speakers, if required, to the bottom of the LCD unit by using the two screws
provided with the speaker.
3.
Feed cables in from the bottom of the display assembly and through the arm, until the
cable connectors are exposed at the LCD end. Check to make sure there is a cable for
each feature.
Cable Function
Power Cable
Data Cable
Touch (optional)
Sound (optional)
4.
After all cables are routed, install metal bracket using two screws. Installing the second
screw requires rotating arm to the other side.
90000291
Digital LCD
Analog LCD
Mini-din connector
Mini-din connector
Custom cable
15-pin VGA
9-pin RS232
9-pin RS232
Sound Connector
Not available
Rev 3.0
MAINTENANCE MANUAL
5-61
Hide quick links:
Advertisement
Table of Contents
