Advertisement
7 7 7 7 7
Removal Procedure
Removal Process for Indoor Unit
Operating Procedure/Photos
Remove panel
Open the panel, pull it slight by hand and then remove the
panel.
(As shown in 7-1)
Remove filter and wire-pressing board
Lift up the middle part of the air filter to loosen the clasps at
both sides. Pull it forward to remove the air filter.
Twist off the one screw on wire-pressing board with
screwdriver to open it. (As shown in fig 7-2)
Remove guide louver
Push out the clasp at the middle of the guide louver, bend the
guide louver slightly and then remove the guide louver. (As
shown in fig 7-3)
panel
filter
clasp
guide louver
Admiral Series
screw
Fig.
Fig.
Fig.
Advertisement
