Advertisement
Operating Procedure/Photos
Remove front case
Twist off the 6 tapping screws used for fixing the front case
with screwdriver, open the front case and then to remove it.
(As shown in fig 7-4)
Remove water tray
Twist off the earthing screws on electric box cover, loosen the
clasps, remove the electric box cover and then pull out the
wiring terminal of guide motor; Twist off the 2 screws used for
fixing the water tray with screwdriver, pull out the connection
wires and then remove the water tray. (As shown in fig 7-5
and 7-6)
screw
clasp
electric box cover
screw
Fig.
Fig.
water tray
Fig.
Advertisement
