Advertisement
Operating Procedure/Photos
Remove outer case
Twist off the 8 tapping screws used for fixing the panel and
then remove the panel. As shown in fig 7-38
Remove electric box
Twist off the screws used for fixing the electric box, pull out
the connection wires between compressor, fan motor and
electric box, pull it upward and then remove the electric box.
As shown in fig 7-39
Remove rear side plate
Twist off the 8 screws used for fixing the rear side plate and
then remove the rear side plate. As shown in fig 7-40
screw
Fig.
Fig.
Fig.
screw
screw
electric box
Advertisement
