Advertisement
Operating Procedure/Photos
Remove electric box
Twist off the 2 screws on electric box.
Pull out the wiring terminal of motor, twist off the earthing wire
and the 3 screws used for fixing the electric box with
screwdriver, pull it upward and then remove the electric box.
Remove evaporator
Twist off the screws on the stopping-plate of rear tube at the
back of the evaporator to remove the stopping-plate of rear
tube. (As shown in fig 7-8)
Twist off the 2 screws at the right side of the evaporator. (As
shown in fig 7-9)
screw
stopping-palte of rear tube
screw
Admiral Series
earthing screw
Fig.
Fig.
Fig.
Advertisement
