Removal Procedure - Gree KM09HEDI Service Manual

Removal Procedure

10. Removal Procedure
Steps
1.Remove panel
Pull the slide clasps at both sides of
panel, pull the panel outwards, lift up
the panel and then remove the panel.
2.Remove filter
Loosen the clasp on the upper side
of filter, pull the panel outwards to
remove it.
3.Remove front case
Remove the 4 screws fixing front case;
Disengage the clasps on both sides
(Follow the arrows); pull the front case
outwards, and then remove the front case.
Be sure to wait for a minimum of 10 minutes after
Warning
turning off all power supplies before disassembly.
Procedure
panel
filter
front case
slide clasps
screw
35