Advertisement
Removal Process for Outdoor Unit
Operating Procedure/Photos
Remove top cover
Twist off the one screw used for fixing the handle with
screwdriver, push it downward and then remove the handle.
Twist off the 3 screw around the top cover, pull it upward and
then remove the top cover.
Remove grille
Twist off the 4 tapping screws between the rear side plate
and valve support, chassis and end plate of condenser and
then remove the grille. As shown in fig 7-14.
Remove panel
Twist off the 7 screws between panel and valve support,
chassis and end plate of condenser and then remove the
panel. As shown in fig 7-15.
top cover
screw
screw
grille
panel
screw
Admiral Series
handle
Fig.
Fig.
Fig.
Advertisement
