Control Cables Interconnection - ABB TLE 625 Series Installation Manual

29/72

4.7.3 Control cables interconnection

Note!
All the cables interconnection must be performed only by an ABB Service Technician!
TLE Series 625 & 750 - Control cables interconnection
1
XD2
(32 poles)
XD1
(46 poles)
Fig. 4.7.3-1 TLE Series 625 & 750 – Control cables interconnection
Pos. Connection
1
XD1 – HAN Connector male (46 poles)
2
XD2 - HAN Connector male (32 poles)
Fig. 4.7.3-2 Connection of hearting connectors (HAN connectors)
Power Section cabinet
1
2
XD2 Connector (32 poles)
(32 poles)
XD1 Connector (46 poles)
(46 poles)
From
"Power Section" cabinet
"Power Section" cabinet
Note!
Proper dressing needs to be done for each cable assembly in
order to reduce the stress.
All the cables must be sufficiently (at least 4"/10cm) away from all
live parts.
Cable binders used to support the wiring must not be overly
tightened.
TLE Series 625 to 1000 PurePulse™ UL S2
In/Out Section cabinet
2
XD2
XD1
All these connections must be performed only by an ABB
Service Technician!
UPS Installation Guide / REV-B
Connecting to
"In/Out Section" cabinet
"In/Out Section" cabinet