ABB TLE 625 Series Installation Manual page 20

20/72 TLE Series 625 to 1000 PurePulse™ UL S2 UPS Installation Guide / REV-B
2.13 " / 54 mm Power Section cabinet In/Out Section cabinet
TLES_UL_1000_S2_UPS fixing_ABB_02
2.37 "
3.94 "/100 mm 3.94 "/100 mm
Frontal side
60 mm
27.56 " / 700 mm 27.56 " / 700 mm 33.46 " / 850 mm
12.80 " 7.87 " 17.72 "
325 mm 200 mm 450 mm
2.37 "
60 mm
143.50 " / 3645 mm
Fig. 4.4.1-8 TLE Series 1000 – UPS cabinet floor fixing points
UPS
3 - 4 - 5 - 6
UPS 2
UPS 1
Fig. 4.4.1-9 TLE Series 625 to 1000 – RPA Parallel System disposition
In case of Parallel System, try to place the UPS modules in sequence of their numbers (marked
on the packing).
If the units are positioned "side by side", the side panels must be mounted on all units.
Remove the side air inlet grids on the intermediate units to run the control bus cable
connections.