Operation; Control Panel; Selection Keys - ABB PowerValue RT G2 User Manual

5 O P E R AT I O N
—

5 Operation

This chapter describes how the UPS is operated through
the LCD.
The user can:
• Operate the LCD
• Start up and shut down the UPS (excluding the
commissioning start up)
• Operate additional SNMP adapters and their software
—

5 .1 Control panel

—
5.1-1:
Control panel
—
5.1-1

5 .1 .1 Selection keys

—
There are four buttons on the front panel .
Button
LCD Display LED indicators
Function Illustration
ON/ENTER
• Turn on the UPS.
Button
• Or press it to confirm the selection in the menu.
OFF/ESC
• Turn off the UPS.
Button
• Or press it to return to the last menu.
• Select the previous item in the menu.
UP
• Or press this button to jump to previous page in the screen.
Button
• Or press this button to increase the number in the setting.
• Select the next item in the menu.
DOWN
• Or press this button to jump to next page in the screen.
Button
• Or press this button to decrease the number in the setting.
UP + DOWN
• To allow LCD display to rotate 90 automatically, press these two buttons at the same time. This operation is
Button
used to configure the UPS in rack or tower display.
Function Keys
The user-friendly control panel has two parts:
• Function keys
• Power management LCD (PMD)
• LED indicators
17