Bennett 3000 Series Installation & Operator's Manual page 5

Mechanical Dispensers and Pump Specification Sheet
Fleetmaster 3000 Volume Only and Heritage 3000 Money/Volume Displays
Standard Features

Mechanical analog display

Stand-alone or console-controlled when
pulser options are specified

Can be controlled by fleet management
system when pulser options are specified

Unit of measure for US gallons, liters, or
imperial gallons

Operates from 115/230Vac, 60/50Hz, or
380 Vac, 50Hz

Self-contained (suction) models feature 1
-HP continuous duty motors

Cascade fluorescent dial face lighting

Satellite Outlet Connection

Self-contained (suction) models: single,
1-product twin, or 2-product twin

Remote models: single, 1-product twin,
or 2-product twin
Construction

Low Hose Cabinet Design or

High Hose Cabinet Design

Long-life cabinet construction using
galvaneal components and powder
coated panels

Black end panels and top

Black dial face covers

Red lower doors (optional colors
available)

Hinged swing out lower door

Hinged swing down upper door

Heavy duty hose hook (optional internal
spring rewind retractor available)
Mechanical Computer or Non-Computer

Fleetmaster uses Veeder-Root
non-computer with totalizer

Heritage uses Veeder-Root 4-wheel
VR10/4 computer with totalizer (optional
VR10 extended price range computer)

U.S. Gallons, Liters, or Imperial Gallons
for volume measurement

Various currency measurements for
Heritage series depending upon country
application

Veeder-Root Electric Reset, 115 or
230volt (optional Cam-Ac manual reset)

Field wiring terminal strip in junction box
located in top display area (installers
should pull 72" (272 cm) of wire above
grade level). Explosion proof j-box in
lower hydraulic area is optional.
Hydraulics

Precision Bennett SB100 Meter, 4-piston,
positive displacement design

Type 75 or type 75-HD Bennett sliding
vane pumping unit with integral vortex air
eliminator
Hydraulics Cont'd

All remote units include built-in inlet
check valves to keep the hydraulics full
and prevent meter/pulser count-up when
the submersible pump pressurizes the
system

Remote units use replaceable paper filter

Suction pumps use a reusable strainer

All units feature 1" hose outlets with a
1"x3/4" reducer bushing

1-1/2" ground-joint union inlet
Options

Veeder-Root Pulsers, 10:1 or 100:1
(VR10 uses OPW-FMS "Western" Pulser
supplied by others for field installation).

2-Stage prepay/preset electric solenoid
valve for 1-product, 1-hose or 2-product,
2-hose suction pumps. (valve is
standard on all other models)

Internal spin-on filter & adapter for
remote models

For High Hose Models, Balance vapor
coax hose outlet and internal vapor
return piping

Vapor recovery nozzle boot kit (field
installed) for balanced vapor nozzles

Healy active vapor system for high hose

Subpump relay 3-Phase Contactor

Intercom speaker for High Hose units

Valance style top for high hose models

Brushed stainless steel lower doors

Brushed stainless steel end panels

Custom lower door colors and/or
graphics

Hose clamp for 5/8", 3/4", or 1" I.D. hose
TM
4-wheel

Explosion proof junction box for lower
hydraulic area

380 Volt 3-Phase Motors

Pressure-regulating valve for suction
pumps with aboveground tank installation

E85 alcohol blend compatibility option

Cam-Ac manual reset in lieu of electric
reset

VR10 Veeder-Root extended price range
computer for Heritage 4000 series

Hand Crank for select models with Cam-
Ac manual reset

Internal Hose Retractor

Strainer in lieu of filter for remotes

Strainer w/ cloth sack for remotes

Strainer w/ cloth sack for suction units

Hoses, nozzles, swivels

Companion LPS satellites
5
For information on flow rates,
motor sizes, and model
configurations see our Model
Configuration Chart &
Specification Sheet
TM
UL listed
Certified for resale applications.
The N.T.E.P. Certificate of
Conformance is available upon
request
Specifications in this document
are subject to change without
notice.
107929 Rev E 04-24-17