Maintenance by Bennett Authorized
Service Representatives
The following maintenance/service procedures should be performed ONLY by Bennett Authorized
Service Representatives.
Manually Opening or Closing the Emergency Shut-off Valve or Testing the Valve's Operation
Emergency Shut-off Valves (Shear Valves, Impact Valves, Crash Valves) are required at the dispenser
inlet for all remote dispensers. The valve incorporates a shear section so that the valve will close if a
vehicle strikes a dispenser. The valve also incorporates a fusible link so that it will close in the event of
a fire.
Use only Bennett Authorized Service Representatives for this type of service.
Changing Filters or Cleaning Strainers
Use only Bennett Authorized Service Representatives for this type of service.
Replacing or Repairing Hanging Hardware (Hoses, Nozzles, Swivels, Break-a-ways
Use only Bennett Authorized Service Representatives for this type of service.
Servicing any electrical or hydraulic components
Use only Bennett Authorized Service Representatives for this type of service.
27
107929 Rev E 04-24-17