Table Of Contents - Bennett 3000 Series Installation & Operator's Manual

Safety Instructions
Introduction for the 3000 series Mechanical Commercial and Retail Dispensers
Product Specifications
Determining the Model Number
Dispenser Identification Number Summary (DIN)
Unloading, Unpacking and Inspecting a New Dispenser
Lifting a New Dispenser and Placing it on the Island
Adjustable Nozzle Hook Instructions
Determining the Number of Product Supply Pipes Needed
Mechanical and Plumbing Notes
Electrical Field Wiring
Pipelines and Under Ground Containment Sumps
Above Ground Tank Installations
Purging Product Lines for Remote Dispensers
Purging Product Lines for Self Contained Dispensers
Piping Notes for Self Contained (Suction) Pumps
Dispenser Startup and Checklist
How to Mechanically Calibrate the SB-100 Meter
Operator Instructions
Owner Maintenance
Maintenance by Bennett Authorized Service Representative
Potting Instructions
Base Dimensions and Wiring Diagrams
Site Audit Form
Bennett Limited Warranty for Products Installed in the United States - 3000 Retail & Commercial
Bennett International Limited Warranty for Dispensers and Pumps ........................................................ 47
Not all equipment covered in this manual is listed by Underwriters Laboratories. Only those
products that bear the Listing Mark of Underwriters Laboratories are listed.
Examine the shipment immediately upon arrival to make certain there has been no damage or loss in
transit. Bennett Pump Company, as shipper, is not liable for the hazards of transportation. Please
make damage claims directly to the truck line.

Table of Contents

NOTICE
IMPORTANT
2
3
4
6
7
8
9
10
12
14
15
15
17
18
19
19
20
21
23
24
26
27
28
28
43
46
107929 Rev E 04-24-17