Table of Contents
Advertisement
6.5
Setup via web inter-
face over Bluetooth
(GR50 Bluetooth
version only)
54
Setup via Web Interface over Bluetooth (GR50)
002981_003
Step
Description
1.
Turn on the GR50.
2.
Use the arrow buttons, go to Configuration, Network Config.
Scroll down to the Bluetooth field and use the left button to enable
Bluetooth.
3.
Activate bluetooth on your computer and search for Bluetooth devi-
ces. The instruments hostname will be listed.
4.
Pair the Bluetooth connection of your computer with the instrument.
The default pairing code is 0000. The pairing code can be changed
later in the web interface.
5.
Once the pairing is finished, right click on the GR device listed in your
Bluetooth devices panel and select Connect.
6.
Go to the Network connections panel of your computer and select
the Bluetooth network connection connected to the GR instrument.
Right click and open the properties.
7.
Highlight the TCP/IP connection and click on the Properties but-
ton.
8.
Enter the IP address 192.168.253.x and subnet mask
255.255.255.0.
9.
Open a browser and type in the IP address: 192.168.253.2 to access
the web interface.
10.
Use the default User name (Admin) and Password (12345678).
☞
After logging in the first time you must create a new user
account, including a new user name and password. The
default user account can then be deleted. Refer to the
"GR/GM Series Operational Manual (Online Help)" for a
step-by-step guide.
11.
Configure the instrument for all required settings.
a
Left button
a
b
Right button
b
c
c
Up button
d
d
Cancel button
e
e
Down button
f
f
Enter button
g
g
Display
h
h
ON/OFF button
Equipment Setup
Hide quick links:
Advertisement
Table of Contents
