Keyboard - Leica SPIDER GR30 User Manual

4.2
GR30/GM30 keyboard
ON/OFF button
Function button
Button combinations
40

Keyboard

a b
GR10_002
Button Function
ON/OFF If GR30/GM30 already off: Turns on GR30/GM30 when
held for 3 s.
If GR30/GM30 already on: Turns off GR30/GM30 when
held for 3 s.
☞ Hold the ON/OFF button for 10 s, to force the instrument to turn off.
Instrument settings and some data can be lost when using this
method.
☞ All the following functions described assume the GR30/GM30 is
already on.
Button Function
Function The Function and ON/OFF button work in combination
and allow a number different functions as described in
"Button combinations".
The Function button switches between these different
functions.
Buttons How to
+ Activate dual button functionality
Press and hold both buttons until all LEDs are flashing.
Then release both buttons. After 1 s, the
logging LED starts flashing.
The following instrument commands are now activated.
After any of the instrument commands in this table was
used, the dual button functionality is turned off automat-
ically. You must turn on the dual button functionality
every time before using the instrument commands.
Start/Stop all logging sessions
Activate the dual button functionality.
If all logging sessions had been off, the Raw data logging
LED is flashing green.
a
b
c
c
GR30/GM30 User Interface
ON/OFF button
Function button
LEDs
Raw data