Leica SPIDER GR30 User Manual page 63

LED indicators
Operation
Step Description
2. Take the SIM card holder out of the slot-in-device.
3. Place the SIM card into the SIM card holder, the chip facing up.
4. Insert the SIM card holder into the SIM card slot, the chip facing the
connectors inside the slot.
Description
Each slot-in-device for a radio or digital cellular phones has Light Emitting
Diode indicators on the bottom side. They indicate the basic device status.
Diagram
a b c d
GR10_012
Description of the LEDs
IF the on
Mode SLR1-2 with
LED Satelline
TA11/SLR5-1
with Satelline
M3-TR1
Data any device
transfer
LED
Signal SLG1-2 with
strength Telit 3G
LED
SLR1-2 with
Satelline
TA11/SLR5-1
a
b
c
d
is THEN
red the device is in the programming
mode controlled from the PC via
cable.
off data is not being transferred.
flashing data is being transferred.
green
red call is in progress.
red: long no SIM card inserted, no PIN
flash, long entered or network search, user
break authentication or network login
in progress.
red: short logged on to network, no call in
flash, long progress.
break
red: flashing GPRS PDP context activated.
red, long
break
red: long Packet switched data transfer is
flash, short in progress.
break
off device is off.
red the communication link, Data
Carrier Detection, is okay on the
roving instrument.
Mode LED, available
for Satelline TA11
Signal strength LED
Data transfer LED
Power LED
63